Hi Guys, I recently acquired a dual LS7366R Encoder Buffer. After setting it up properly it worked fine for my system. It counted the revolutions of my wheel very reliably (I displayed the position on my PC and it made sense). But after programming a warn signal, which would be triggered, when the encoder count would be outside of a certain range, I realized that for a very brief moment the encoder count is outside this range (this happens randomly every few seconds). I fixed the issue with a median filtering. My question would be, whether anyone has experienced a similar issue or if this is a system specific problem. Thanks in advance for your replies!
This topic was modified 2 months, 2 weeks ago by Jamal.