BLOWING A 10 AMP FUSE Register LoginHome › Forums › Product Questions › BLOWING A 10 AMP FUSE Click Here To ReplyThis topic contains 1 reply, has 2 voices, and was last updated by SuperDroid 8 months ago. Viewing 2 posts - 1 through 2 (of 2 total)Author Posts September 19, 2018 at 6:22 pm #5745 Lance HinekParticipantI have a TP-261-000 wheeled lawnmower kit. The wheels moved for a few seconds then the fuse blew. The wheels were off the ground and was just testing the controls. The fuse is 10 amp. Could it be that the transmission is “stiff”? September 20, 2018 at 8:15 am #5746 SuperDroidKeymasterHi, The 10A fuse is for charging, the breaker is the one you need to use for the motors and motor controller. You should have one fuse for the charger and one breaker for the rest of the electronics.Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.