I am building a 4wd lawn mower and I have 4 wheelchair motors with 4 lug hubs on them. Will the TD-109-010 fit? I was told the measurement for these hubs are measured from center hole to center hole. The hubs I have measure 2.5″ or closer to 2 7/16″ or 2 3/4″ from outside to outside. See image.
The hole pattern for that wheel is 2.76″ center to center so that wheel will not fit your shaft. It might be possible to slot the holes on your shaft to fit. Or, if you need a custom shaft, please submit a fabrication request with the specs you need. Thanks.