Garmin GPS 18X 5Hz to Jetson Tx2 Connection Register LoginHome › Forums › Electrical & Controls › Garmin GPS 18X 5Hz to Jetson Tx2 Connection Click Here To ReplyTagged: Garmin GPS 18x 5hz, JetsonThis topic contains 2 replies, has 2 voices, and was last updated by Tyagi 3 months, 3 weeks ago. Viewing 3 posts - 1 through 3 (of 3 total)Author Posts April 1, 2019 at 6:51 pm #6772 TyagiParticipantHi,Just received my RS232 to USB converter and the female solder pot connector. What is the correct wiring for the adapter? Is it similar to the GPS manual pin 2 to Tx, pin 3 Rx, and pin 5 for GND? what do I do with the power cable?ThanksTyagi April 2, 2019 at 10:52 am #6773 SuperDroidKeymasterHey Tyagi,See the attached image for the cable pinouts on the RS232 end. The GPS will need to grab power from a 5V pin on the Jetson or another 5V bus.Attachments:You must be logged in to view attached files. April 3, 2019 at 9:17 am #6775 TyagiParticipantThanks a lot. I got some output from the GPS using GPSCAT command. Now to put it all together.TyagiAuthor Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.